Product Information

NeoPower is a toluene-free bio neoprene adhesive that prioritises safety for both users and the environment. With a low odour formulation, it ensures a more tolerable user experience compared to other adhesives. Additionally, it has low VOC guaranteeing uncompromised health with every application. This adhesive delivers high bonding strength, making it suitable for a variety of substrates including laminates, automotive trims, skirting, and rubber bonding.

• LOW ODOUR
• TOLUENE-FREE 
• BIO-BASED

• LOW VOC (INDOOR AIR COMPLIANT)
• HEAT-RESISTANCE (UP TO 160°C)

1. Working surfaces and adhesive should be between 160°C and 270°C.
2. Surfaces to be bonded should be clean and free from oil, dust and other foreign materials.
3. Apply adhesive to both surfaces to be bonded.
4. Allow adhesive to dry until it is no longer tacky to touch. Bonding of materials should occur within 20 minutes of adhesive application for optimum bond strength – if left longer a light spray coat to both surfaces should be re-applied to reactivate the adhesive.
5. Bring the materials into position and apply as much pressure as possible to obtain optimum bond strength. A minimum pressure of 280kPa (40psi) is required to give optimum bond strength. Hand pressure is not sufficient!
6. Do not spray below 10°C as condensed moisture may form on the adhesive film and prevent bonding.

Tools Required

• Roller 
• Airspray Gun
• Compressed Air
• Drum Tap

Handling & Storage 

• Consult Safety Data Sheet prior to use
• Do not store at temperatures over 50°C
• Avoid exposure to direct sunlight.
• Do not store directly on concrete floor